Garage door remote compatibility finder
Use the exact remote model, opener model or LEARN-button generation. Verified records across LiftMaster, Chamberlain, Genie, Craftsman, Linear, Marantec, Overhead Door and Raynor link back to manufacturer documentation; unsupported combinations return no match instead of an inferred recommendation.
Keep Genie remote programming in the correct evidence order
Do you know the remote model and whether the opener uses Intellicode 1 or Intellicode 2?
Genie programming depends on the accessory and opener generation. Identify the exact remote first, put the opener into its documented learn/program mode, then test one programmed button before adding more accessories.
GIR1DR-R / GIRUD-1T universal receiver Intellicode 315/390 MHz
The installed universal receiver creates a Genie Intellicode remote path
Genie says this receiver kit can upgrade older openers from major brands using Intellicode and Auto-Seek Dual Frequency 315/390 MHz. Keep the underlying opener model separate for mechanical diagnostics.
Any Genie opener equipped with Intellicode
G1T one-button or G3T three-button Intellicode remote
Genie states these remotes are compatible with Genie Intellicode garage door openers. Verify the opener generation to choose the correct programming entry sequence.
G1T / G1T-BX / G1T-A / 38501R
Genie one-button Intellicode remote programming
Genie's official G1T instructions cover Learn Code and Program/Set opener families.
G3T / G3T-R / G3T-BX / G3T-A
Genie three-button Intellicode remote programming
Genie lists G3T-family programming for newer Program-button openers and 1995–2011 Learn Code openers; 1995–1997 units use the two upper remote buttons.
GL2T two-button flashlight remote
Genie GL2T programming
Official Genie instructions cover newer Program-button openers and 1995–2011 Learn Code openers/receivers.
GM3T-R + Intellicode 1 / red remote LED
Use the GM3T-R Intellicode 1 programming path
Genie says GM3T-R ships in Intellicode 1 mode, indicated by a red LED on the remote button.
GM3T-R + Intellicode 2 / green remote LED
Switch the selected GM3T-R button to Intellicode 2, then pair
Genie identifies Intellicode 2 on GM3T-R by a green remote LED and uses the opener's Program/Set blue-to-purple sequence.
AT90 remote / older fixed-code setup
Genie Master Remote GM3T-R
Official Genie store guidance points older AT90 replacement to the Master Remote rather than standard Intellicode-only remotes.
SD2500
Genie Master Remote GM3T-R
Official Genie store Q&A identifies the Master Remote for this older model. The standalone GM3T-R is now marked discontinued, so verify the current replacement before buying.
GIT-1
G1T-BX one-button replacement
Official Genie store guidance identifies G1T-BX as the one-button replacement for GIT-1.
6172
Exact model: Genie wall-mount opener with Intellicode remote system; use a current Genie Intellicode accessory verified for the installed programming interface
Genie lists Model 6172 with an Intellicode remote and dual-frequency/Intellicode security. Preserve the exact 6172 model first, then use the current Genie accessory/programming instructions for the remote you choose.
3055 / SilentMax 750
Exact model: Genie Intellicode opener; use a current Intellicode remote and the official programming path for that accessory
Genie lists Intellicode security and pre-programmed remotes for Model 3055. Do not borrow 3053 smart-connectivity assumptions when selecting or programming the remote.
3053 / SilentMax Connect
Exact model: Genie Intellicode opener with integrated Aladdin Connect; remote selection stays in the Intellicode branch
Integrated Aladdin Connect changes smart/network troubleshooting, not the basic Intellicode remote-family evidence.
7035 / Chain Drive 750
Exact model: Genie Intellicode opener; verify a current Intellicode remote/accessory and follow its official programming instructions
Battery backup and chain drive identify the 7035 model but do not change the Intellicode remote-family starting point.
2033 / Chain Glide Connect
Exact model: Genie Intellicode opener with integrated Aladdin Connect; use a current Intellicode accessory
The 2033 combines chain drive and Aladdin Connect, but remote compatibility still starts from its documented Intellicode platform and the current accessory instructions.
2028 / ReliaG Pro
Exact model: Genie Intellicode opener; use a current Genie Intellicode remote and its official programming path
Genie documents Intellicode plus Auto-Seek 315/390 MHz for Model 2028. Preserve 2028 vs 2028B when troubleshooting battery behavior.
4042 / SilentMax 1200
Exact model: Genie Intellicode opener; current Genie Intellicode remotes are the verified radio-family starting point
The official 4042 product/support pages identify Intellicode, Safe-T-Beam and the SilentMax 1200 model family. Follow the chosen accessory's current programming instructions.